Partitions have become an essential element of modern interior design — whether for privacy, zoning, or aesthetic enhancement. From home offices to living rooms, partitions help break large spaces into purposeful zones.
But the durability and finish of these partitions depend largely on one key material: plywood.
So, what is the ideal plywood thickness and grade for partitions? Let’s find out.
Why Plywood Is Ideal for Partitions
Compared to gypsum, MDF, or plastic panels, plywood offers:
- Higher structural strength
- Better laminate or veneer finish
- Superior screw-holding capacity for shelves or decor
- Water and termite resistance, when you choose the right grade
It’s also lighter than solid wood and easier to customize on-site or at the factory.
Recommended Plywood Thickness for Partitions
| Partition Type | Recommended Thickness |
|---|---|
| Simple Room Divider (Fixed) | 12mm – 16mm |
| Floor-to-Ceiling Solid Partition | 18mm – 25mm |
| Decorative Open-Slat Partition | 12mm – 18mm |
| Partition with Shelves or Cabinets | 18mm – 25mm |
| Lightweight Partition (Portable) | 9mm – 12mm |
| CNC Carved or Jali Partition | 12mm – 16mm (HDiHMR) |
Ideal Plywood Grades for Partition Work
1. BWR Plywood (Boiling Water Resistant – IS:303)
- Medium to high water resistance
- Excellent strength and durability
- Ideal for semi-permanent or permanent partitions
- Recommended: Plyneer Calibrated BWR Grade Plywood (12mm/18mm)
2. HDiHMR Board (High-Density, Moisture Resistant MDF)
- Perfect for CNC routing, grooved designs, paint/PU finish
- Great for decorative open partitions, wall features, or painted jali designs
- Medium water resistance
- Recommended: Plyneer HDiHMR 12mm / 16mm
3. BWP Plywood (Boiling Waterproof – IS:710)
- Maximum waterproofing and strength
- Suitable for wet zones or bathroom partitions
- Long-term performance guaranteed
- Recommended: Plyneer Gold BWP or Neem BWP 18mm / 25mm
4. MR Grade Plywood (Moisture Resistant – IS:303)
- Budget-friendly and suitable for dry indoor use
- Good for temporary or portable partitions
- Not ideal near kitchens, bathrooms, or exterior walls
- Recommended: Plyneer Gold MR or Zarc MR 12mm / 16mm
Best Finishes for Plywood Partitions
| Finish Type | Compatible Plywood |
|---|---|
| Laminate Finish | BWR, BWP, MR (Calibrated) |
| PU Paint | HDiHMR |
| CNC Carving | HDiHMR |
| Veneer Finish | BWR/BWP with Eucalyptus Core |
| Raw Wood Look | Calibrated MR/BWR |
Average Price Range by Thickness (8x4 Sheets)
| Ply Grade | 12mm | 16mm | 18mm | 25mm |
|---|---|---|---|---|
| MR Grade | ₹1,400 | ₹1,700 | ₹1,900 | ₹2,600 |
| BWR Grade | ₹2,000 | ₹2,300 | ₹2,600 | ₹3,400 |
| BWP Grade | ₹2,600 | ₹2,900 | ₹3,200 | ₹4,000+ |
| HDiHMR Board | ₹2,200 | ₹2,500 | ₹2,700 | Not common |
Plyneer Partition Recommendations by Use Case
| Use Case | Plyneer Product Suggestion |
|---|---|
| Office Desk Divider | 12mm HDiHMR (painted) |
| Bedroom Divider (Decorative) | 16mm Calibrated MR / HDiHMR |
| Living Room Open Partition | 18mm BWR / HDiHMR |
| Wet Area Divider (Bathroom Zone) | 18mm or 25mm BWP Plywood |
| Partition with Cabinets/Shelves | 18mm BWR or Plyneer Club (fireproof) |
| CNC Partition with Paint Finish | 16mm Plyneer HDiHMR |
Where to Buy Quality Plywood for Partitions
You can get the ideal partition-grade plywood from:
Authorized dealers
- Online plywood platforms
- Direct from manufacturers like Plyneer
Make sure to:
- Ask for calibrated sheets if finishing matters
- Request ISI-certified (IS:303 or IS:710) plywood
- Choose warranty-backed products for peace of mind
Conclusion
When it comes to partitions, plywood provides an unmatched mix of:
- Structural strength
- Moisture resistance
- Finish flexibility
Choose:
- 12mm–16mm for decorative or lightweight designs
- 18mm–25mm for structural or multifunctional partitions
- HDiHMR or Calibrated BWR/BWP for lasting performance
Plyneer Advantage:
At Plyneer, we offer:
6mm to 25mm calibrated plywood
Moisture-proof, fire-retardant, and HDiHMR options
Custom sizes and factory cutting for partitions
Bulk pricing for commercial partition projects
